Link: http://www.computercareonline.com/index.php
© designjetparts.com 5/17/2013
In an article titled: Windows Phone Overtakes BlackBerry in Smartphone Shipments, Not That It Matters.
According to new research from IDC, Microsoft’s mobile operating system accounted for 3.2 percent of global smartphone shipments in the first quarter. That’s a significant gain from the OS’s performance in the first quarter of 2012, which saw it capture a market share of 2 percent. And it was enough for Windows Phone to unseat BlackBerry from its third-place spot and claim the rank for its own.
HP LaserJet 4200/4250/4300/4350:
An Easier Way to Replace the Swing Plate Assembly (RM1-0043)
The swing plate assembly, a small obscure assembly in the right rear of the HP LaserJet 4200/4300 series of printers, has recently become very popular. Why? One reason is that, obscure as it is, it has a very important job: to couple the printer's main drive assembly to the fuser. The other reason is that if the fuser isn't fully seated (which is unfortunately a common problem in this series of printers), it will "bounce" when the swing plate attempts to drive it. This can damage both the gear in the fuser and the gear in the swing plate. The standard remedy for this condition is to replace both assemblies (fuser and swing plate).
In HP laser printers and DesignJet Plotters, the network configuration is stored on the network card (also known as the JetDirect card or EIO card), not on the Formatter board.
(Follow this procedure for HP DesignJet Plotters as well) Therefore, you need to reconfigure whenever a network card is installed or replaced. There are numerous ways to configure the network. Here's what we recommend: