Archives for: June 2014, 13 - DesignJet Plotter Repair

Archives for: June 2014, 13

The Encoder Strip bracket must be properly hooked on the pin or nub on the Service Station bracket, the tension from the Encoder Strip will pull against the bracket and keep it locked in place. The Encoder Strip will pass around the metal bracket from the rear side of the plotter and the two holes in the end of the Encoder Strip will be hooked over the two metal pins on the bracket. more »
June 2014
Sun Mon Tue Wed Thu Fri Sat
 << < Current> >>
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30          
Do it yourself repair information for your HP DesignJet Plotter.

Sponsor

Donation

Did this site save
(or help earn) you money?
Say thanks with a
small donation.

Search

XML Feeds

Disclaimer

All information is presented As-Is, with no warranty. Use at your own risk. DesignJetParts.com is operated by Computer Care. One Stop for all you computer, printer, plotter and network parts and supplies
blog soft
Our Sitemaps: XML  HTML  ROR