Categories: DesignJet Error Codes, 2000CP, 2500CP, 3000CP, 3500CP, 500/510 / 800 Plotter, 5000, 5500, DesignJet 1050C 1055 CM and Plus, DesignJet 4000, 4500, DesignJet Copier CC800PS Error Codes, DesignJet T1100 T1100PS T610, DesignJet Z6100, Z2100 and Z3100 Error Codes

Due to questions called into our shop over the years of the exact location and orientation of the Encoder Strip on the HP DesignJet 500 / 510 / 800 plotter models; we thought it was time to post some tips and photos to help you with the correct placement… more »
System error 02:10 is generated when the printer has detected a fault in the carriage assembly. This error usually appears when a print job has been sent to the printer. Causes of this error can include the trailing cable, carriage or the electronics module more »
The Encoder Strip bracket must be properly hooked on the pin or nub on the Service Station bracket, the tension from the Encoder Strip will pull against the bracket and keep it locked in place. The Encoder Strip will pass around the metal bracket from the rear side of the plotter and the two holes in the end of the Encoder Strip will be hooked over the two metal pins on the bracket. more »
There are a multitude of errors that can be traced to a dirty or damaged encoder strip.When diagnosing, troubleshooting and repairing these errors first you have to become accustomed to the errors that DesignJet plotters give when they cannot locate the carriage assembly in its travel path more »
A problem with Channel sensor 1 has been detected. Most common causes are poor cable connections, incorrect sensor positioning, a faulty Channel sensor or Electronics module. Follow the steps listed below to determine the actual cause of the failure and to replace the appropriate parts. Error Codes 0D0001 refers to Channel 2 Sensor, 0D0002 refers to Channel 3 Sensor, 0D0003 refers to Channel 4 Sensor more »

1 2 3 4 >>

July 2017
Sun Mon Tue Wed Thu Fri Sat
 << <   > >>
            1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31          
Do it yourself repair information for your HP DesignJet Plotter.

Sponsor

Donation

Did this site save
(or help earn) you money?
Say thanks with a
small donation.

Search

XML Feeds

Disclaimer

All information is presented As-Is, with no warranty. Use at your own risk. DesignJetParts.com is operated by Computer Care. One Stop for all you computer, printer, plotter and network parts and supplies
powered by b2evolution free blog software
Our Sitemaps: XML  HTML  ROR