DesignJet Plotter Repair

The Encoder Strip bracket must be properly hooked on the pin or nub on the Service Station bracket, the tension from the Encoder Strip will pull against the bracket and keep it locked in place. The Encoder Strip will pass around the metal bracket from the rear side of the plotter and the two holes in the end of the Encoder Strip will be hooked over the two metal pins on the bracket. more »

There are a multitude of errors that can be traced to a dirty or damaged encoder strip.When diagnosing, troubleshooting and repairing these errors first you have to become accustomed to the errors that DesignJet plotters give when they cannot locate the carriage assembly in its travel path more »